Manufactured Concrete Products (MCP)

Chryso®Optec EC-191 admixture is specially formulated to control primary efflorescence by reacting with alkaline salts before water can solubilize them. It is a ready-to-use admixture to enhance the quality and appearance of masonry units. Chryso®Optec EC-191 admixture is designed for the production of concrete pavers and segmental retaining wall units, but it can also be used in other low or zero slump machined concrete products such as architectural concrete masonry units and concrete brick.

Chryso®Optec EC-250 admixture is designed to enhance the quality and appearance of concrete pavers, segmental retaining wall units and other low slump concrete products. Chryso®Optec EC-250 admixture controls secondary efflorescence thus enhancing color. It also provides excellent mix plasticity and machinability which helps reduce overall production cycle times. Chryso®Optec EC-250 admixture is used to reduce secondary efflorescence, provide good machinability and improve unit densities. It can be used for concrete pavers, architectural concrete masonry units or segmental retaining wall units where increased mix plasticity and efflorescence control are desired.

Chryso®Optec EC-912 is an innovative admixture specifically formulated to enhance the overall appearance of hardscapes and architectural concrete masonry units.

Chryso®Optec EC-925 is an innovative admixture specifically formulated to enhance the overall appearance of hardscapes and architectural concrete masonry units. Chryso®Optec EC-925, is a unique blend of novel ingredients that help improve and retain color vibrancy by controlling both primary and secondary efflorescence. Chryso®Optec EC-925 also contains a “slip” ingredient that aids in workability and provides a smooth modest swipe texture on the surface of the unit. Chryso®Optec EC-925 may be used in hardscapes such as concrete pavers, concrete slabs and segmental retaining wall units. Other uses where improved aesthetics are desired include architectural block, concrete brick, manufactured stone veneer and cast stone units. Chryso®Optec EC-925 is designed to reduce both primary and secondary efflorescence, while maintaining unit physical properties.

Chryso®Optec EC-935 is a liquid admixture added to the concrete during the batching process. It controls efflorescence in hardscapes, dry tamp cast stone and other low slump concrete products. It also provides workability, increased strengths and a tight surface texture.

Chryso®Optec EC-978 admixture provides color enhancement and efflorescence control to the concrete roof tile industry. It is formulated as a ready-to-use admixture to aid the extrusion process and enhance the quality and appearance of concrete roof tile.

Chryso®Dry-Block Mortar Admixture, part of the Chryso®Dry-Block System, is formulated based on a patented technology. It is a liquid, integral water-repellent admixture for masonry mortar. The wicking property, the amount of water absorbed by the masonry mortar is dramatically reduced when Chryso®Dry-Block Mortar Admixture is added at its recommended dosage rate. Chryso®Dry-Block MortarAdmixture is a requirement for all Chryso®Dry-Block System projects and no substitutions shall be allowed. As an integral admixture, Chryso®Dry-Block Mortar Admixture provides water penetration resistance throughout the depth of the mortar joint. Chryso®Dry-Block Mortar Admixture’s water-repellent properties will prevent the moisture from wicking through the mortar joint into the building’s interior. Likewise, it will not be wicked back to the exterior carrying soluble salts that can cause efflorescence at the joints on the wall exterior.

Chryso®Dry-Block G3 provides water repellency and improves cement dispersion. This dispersion action may allow for cement and pigment reductions, though testing is recommended to determine the reduction potential. It may also permit increased water in the concrete mix, promoting greater cement hydration in the CMU. Additionally, it enhances the plasticity of the mix, eliminating the need for a second admixture for machinability. Chryso®Dry-Block System consists of two separate admixtures: Chryso®Dry-Block G3, which is mixed throughout the concrete during the manufacture of the concrete masonry unit (CMU), and Chryso®Dry-Block Mortar, which is added to the mortar. Through its novel chemistry, it provides excellent water repellency while improving color vibrancy and controlling both primary and secondary efflorescence.

Chryso®Quantec PL-450 admixture is specially formulated for use in the production of zero or low slump concrete pipe. Chryso®Quantec PL-450 admixture is designed to produce a smooth texture on the web of the pipe. It may also be used in the manufacture of other low slump concrete products such as concrete block where a light swipe is desired. Chryso®Quantec PL-450 admixture may be used in all zero or low slump concrete pipe to increase workability while retaining cohesiveness and to provide for more complete hydration of the cement. Chryso®Quantec PL-450 admixture improves the dispersion of the cement throughout the mix as well as improving the workability of the mix. The increased workability achieved with Chryso®Quantec PL-450 admixture allows for better compaction of the pipe with a reduction in surface cracking and improved surface quality, resulting in fewer culls. Overall quality of the pipe is improved with an enhanced surface appearance on the webbing of the pipe.

QUANTEC® PL-466 admixture is specially formulated for use in the manufacture of machined concrete products where the process requires zero or low slump concrete and where a smoother, denser, surface finish with a swipe is desirable. QUANTEC® PL-466 admixture may be used in all zero or low slump concrete to increase workability while retaining cohesiveness. The admixture is intended for use in concrete block, concrete pipe, concrete pavers, concrete roof tile and concrete brick. QUANTEC® PL-466 admixture is a dispersing agent designed to provide a swipe finish. By dispersing the cement and aggregate fines, it improves the workability of the mix. Dispersion of the cement results in more complete hydration of the cement. The increased workability provided by QUANTEC® PL-466 admixture allows for better compaction of the concrete with less cracking and crazing and sharper corners and edges, resulting in fewer culls. Production can be increased, absorption reduced, and appearance and surface characteristics greatly improved.

Chryso®Quantec PL-477R admixture is specially formulated for use in the manufacture of machined concrete products where the process requires zero or low slump concrete, and where a normal textured surface is desired.

Chryso®Quantec PL-490 admixture is a concentrated plasticizer specially formulated for use in the production of concrete block, concrete, pipe and other low slump concrete products where a smooth, tight surface with a light swipe is preferred. Chryso®Quantec PL-490 admixture is supplied as a liquid concentrate but it is intended to be used in a diluted form. 

Chryso®Morset Set Accelerator is a non-chloride, non-corrosive admixture that accelerates cement hydration resulting in shortened setting times and increased early strengths. Chryso®Morset Set Accelerator is an aqueous solution of organic and inorganic compounds and does not contain any chloride compounds such as calcium chloride. Chryso®Morset Set Accelerator is manufactured to comply with the requirements of ASTM C1384, Standard Specification for Admixtures for Masonry Mortars. Chryso®Morset Set Accelerator is used wherever it is desirable to reduce the setting time of mortar or stucco. Chryso®Morset Set Accelerator is not an anti-freeze admixture nor is it intended to prevent mortar from freezing. When used in conjunction with cold weather practices (see CHMA TEK 3-01C), Chryso®Morset Set Accelerator provides superior performance and allows for construction to continue.

Chryso®Daraweld C is a high-performance bonding agent for concrete, designed to enhance the adhesion between new and existing concrete surfaces. This product features a dispersion of internally plasticized, high polymer resin in water. When mixed with cement, sand, and water, it forms a strong, highly adhesive bonding grout.  This grout adheres effectively to properly prepared concrete substrates, ensuring a durable and reliable bond.   Meets the requirements of ASTM C1059 Standard Specification for Latex Agents for Bonding Fresh to Hardened Concrete (Type II)

Chryso®Mortard E Retarder is a ready-to-use aqueous solution of chemical compounds that provide extended life, increased workability and greater compressive strengths of Portland cement-based masonry mortar. Chryso®Mortard E Retarder is primarily used in centrally produced (batch plant) extended life masonry mortar. However, due to its unique formulation, Chryso®Mortard E Retarder may also be used in job site mixed mortar to enhance mortar boardlife and workability during warm weather construction. Chryso®Mortard E Retarder is used to provide extended life in Portland cement/ lime mortar as well as in masonry cement and mortar cement mortars. Other uses for Chryso®Mortard E Retarder include Portland cementbased stucco scratch and surface coats. Chryso®Mortard E Retarder is also used in colored mortar and assists in greater color uniformity.

Chryso®Pallet Lub 205 is a blend of tall oil resins and wetting agents specifically formulated to create a smooth, slippery barrier between the metal surface of the pallet and the concrete. On a pallet turning machine, the action of the turner tends to increase the effectiveness of this barrier. Chryso®Pallet Lub 205 is an extremely effective release agent for the top ring, spindle, and pallet of a pipe machine. Chryso®Pallet Lub 205 is a non-flammable water-based material that eliminates the precautions required by hazardous, quick drying pallet compounds.

Chryso®1727 Pallet Oil Concentrate is a blend of oxygenated hydrocarbons and water displacing chemicals that make an extremely effective pallet oil when combined with fuel oil, diesel fuel, or kerosene. Chryso®1727 Pallet Oil Concentrate can be used on all block pallets and other equipment where rust or concrete build-up is a concern. When combined with fuel oil, Chryso®1727 Pallet Oil Concentrate meets the needs for a non-staining lubricant for ABC Curing Systems. Chryso®1727 Pallet Oil Concentrate lowers the push pressure on the hydraulic ram and improves lubricity resulting in a cleaner pallet conveyer.

Chryso®Release Crete is a high quality chemical action-type release agent for use on all types of forms used for concrete. It is also extremely effective when used to prevent concrete from bonding to form surfaces as well as mixers, mold boxes, pallets, tools and wheelbarrows.

Chryso®Dem Aquarol 350 is a suspension of 100% synthetic lubricants in water. It enables forms to be removed from precast concrete under the most technically advantageous conditions, whether heated or unheated concrete is used. After the water has dissipated, the fine white droplets deposited by atomization collect to form a continuous, non-fatty film that provides a very high quality finish and release from the mold.

Chryso®Kwik-Kleen is a non-acidic, aqueous solution of environmentally safe chemical compounds used to reduce the build-up of concrete on molds and mixers. Chryso®Kwik-Kleen stabilizes the hydration process of Portland cement preventing it from reaching initial set. This stabilization is not permanent and is controlled by dilution and application rate. Kwik-Kleen is applied to the mixer and the molds with a hand-held sprayer. Its chemical reaction prevents the concrete residue from setting. The concrete residue is then easily removed with minimal cleaning.

Chryso®Trysta freeze/thaw durability-enhancing admixture is based on patented technology. It is for zero slump concrete applications such as segmental retaining wall units and concrete pavers, which are exposed to environments of repeated freezing and thawing. When water freezes, it undergoes an approximate nine percent volume expansion. In low slump manufactured concrete products this expansion occurs in the cement paste and induces significant stresses that cause the cement paste microstructure to rupture and fail. Chryso®Trysta admixture improves the freeze/thaw durability of manufactured concrete products in two important ways. First, it improves cement utilization, enhancing cement dispersion in low-slump concrete mixtures. This improves the overall quality, uniformity, and strength of the cement paste. Second, it entrains micron-sized air bubbles which act as escape boundaries for the expanding ice front. These air bubbles act as relief valves in a similar fashion as the entrained air in freeze/thaw durable ready-mix concrete

Chryso®Daraccel M is a liquid admixture is formulated for use in the manufacture of zero or low slump concrete products, where the process requires accelerated early strengths. This product contains calcium chloride as well as other additives to enhance the effect of the calcium chloride. Chryso®Daraccel M admixture may be used in all zero or low slump concrete to provide increased “green” strength, and may reduce or eliminate the requirement for steam curing. The increased strength development can also allow for replacement of Type III cement with Type I/II or Type IL cement.