Blog
Find the latest News and information from Chryso
Offset the Potential Corrosive Effect of Chlorides in a Concrete Mix Using DCI® – TB-0901
DCI® Corrosion Inhibitor may be used to offset the corrosive effects of chloride ions found in…
Low Shrinkage Mix Design Optimization Guidelines for ECLIPSE® Floor 200 – TB-1001
ECLIPSE® Floor 200 Shrinkage Reducing Admixture is a liquid concrete admixture specifically formulated for reducing the…
General Properties and Benefits of DCI® S Corrosion Inhibitor – TB-0903
DCI® S Corrosion Inhibitor is formulated for situations where accelerated concrete set times are not required…
Recommendations for Dispensing DARAFILL® Dry – TB-1100
DARAFILL® Recommendations DARAFILL® is encapsulated in high density wax “eggs.” DARAFILL® capsules are available in two…
STRUX® 90/40 Concrete Recommended Mix Designs, Dispensing, Mixing, Placing and Finishing – TB-1200
STRUX® 90/40 Synthetic Macro Fiber Reinforcement is a 40 mm (1.55 in.) long high strength and…
STRUX® Macro-Fibers Provide Superior Post-Crack Control
“The need for synthetic macro fibers in concrete reinforcement came from customers,” Director of Concrete Research…
The Importance of Using DRY-BLOCK® – TB-0012B
The DRY-BLOCK® System of Integral Water Repellents has been successfully used to provide protection from moisture…
TYTRO® Delivers Efficient Shotcrete Mixes
We have launched a new generation of shotcrete admixtures designed to lower the installed cost of…
VIDEO: Air-Entrainment Rapid Air Test for Concrete
One of the techniques our company leverages—that a lot of other companies don’t use—is the Rapid…
Concrete Analysis Using Fluorescent Microscopy
The fluorescent microscopy technique allows scientists to accurately determine the water/cement ratio of hardened concrete in…
Achieve Desired Technical Shotcrete Performance
Silica fume is often used to to improve the performance of shotcrete mixtures. TYTRO® RC, a…